Navtex receiver with coastal function


Tri-channel Navtex receiver with coastal function model: SMARTFIND GMDSS NAVTEX
  • Display: 6 inch, ½ VGA (480 x 320 pixels) 
  • Daylight viewable colour STN with adjustable backlight and screensaver 
  • Controls: Backlight/contrast key, Enter key, four soft menu keys, Tracker pad 
  • Receivers: Receiver A: Frequency 518kHz · Receiver B: Frequency 490kHz · Receiver C: Frequency 4209.5kHz 
  • Sensitivity: <2 microvolts · Frequency stability: +/- 10Hz
  • Connectors: 15 way 
  • D-type: Power, Alarm & COM 1 data · (2m cable supplied with connector pre-wired) 9 way 
  • D-type: Printer/COM 2 · Antenna connector: 50 ohm TNC · Ground connector: 1/8” Spade terminal 
  • Data interface: COM 1: RS422 (NMEA 0183) IEC 61162-2 serial port · COM 2: RS422 (NMEA 0183) IEC 61162-1 serial/printer · Baud rate: 4800, 38400, 115200 · NMEA sentences supported: (in priority order) RMC, GLL, ZDA for UTC and NRX, NRQ, NMK, ACK, ALR for NAVTEX functions Alarms: Vital/SAR message receipt (internal buzzer). Alarm state NMEA message data output COM1/COM2. Remote alarm relay contact 1A @ 120VAC/ 24VDC Antenna voltage output: 12 V DC @ 100mA (selectable) Antenna type (option): 50 ohm, dual band 490 -4209.5KHz active or passive NAVTEX message memory: 300 x 500 character messages per receiver (minimum) 
  • Dimensions: 219W x 151H x 76D mm (excluding connectors) · Weight: 1100g (including bracket) 
  • Environmental: Operating Temperature Range: -15° to +55°c · Storage Temperature Range: -20° to +55°c Humidity: 0 to 95%, non-condensing 
  • Mounting: Desk-top or bulkhead (flush panel fixing kit included)
  • Power: Voltage range: 12/24 V DC nominal (10.8 V to 31.2 V) · Consumption: with backlight on 8.6 W @ 24 V DC Internal auto resettable fuse @ 1.8 A DC Technical Standards: IMO Resolutions, MSC.148(77) A.2.1 (17) · SOLAS Regulation IV/7.1.4, ITU-R M.540-2, ITU-R M.625-3 · IEC 60945-4, IEC 61162- 1, -2, IEC 61162-2, IEC 61097-6
Back Home