Power Supply NPS-1124



Power supply model NPS-1124

The NPS-1124 power supply and battery charger is a 4U 19" aluminium frame; 
it can host two PWS-1124 power supply modules and one BCU-1124 battery charger module.
It is especially suited for use where redundant power supply is required, since each module can be hot-swapped without interrupting power output.
The NPS-1124 features a connector for mains power input (VAC Line), a power connector for DC power output (VDC OUT), and a power connector for battery connection (Battery).
The BCU-1124 module is a microprocessor-controlled battery charger; it can:
  • charge 24 V lead-acid batteries up to 200 A
  • check battery charging status and end of charging
  • check for possible overloading
  • manage discharging, disconnecting battery load if the battery voltage drops below a threshold, in order to avoid damage to batteries due to excessive discharging.
The PWS-1124 module transforms the mains voltage (220 V ac) into dc voltage (24 V dc nominal).


General features

Power supply voltage: 220 Vac
Dimensions (w x h x d): 482.6 x 177 x 320 mm
Weight: 20 kg
Operating temperature: -10 °C ÷ +55 °C
Storage temperature: -40 °C ÷ +70 °C
Humidity: Up to 95% with T: +25 °C ÷ +55 °C


PWS-1124 features

Power supply voltage: 220 Vac
Output voltage:  24 Vdc
Maximum output current: 20 A
Signaling: Power On, Open Fuse
Weight: 7 kg
Operating temperature: -10 °C ÷ +55 °C
Storage temperature: -40 °C ÷ +70 °C
Humidity: Up to 95% with T: +25 °C ÷ +55 °C


BCU-1124 features

Power supply voltage: 30 Vdc
Battery charging voltage: 27.6 Vdc
Maximum charging current: 15 A
Signaling: Power, Charge, Battery Mode, Overload, Open Fuse
Weight: 1 kg
Operating temperature: -10 °C ÷ +55 °C
Storage temperature: -40 °C ÷ +70 °C
Humidity: Up to 95% with T: +25 °C ÷ +55 °C








Document

Back Home